Late Static Bindings
Ultimate explanation to object references:
NOTE: wording 'points to' could be easily replaced with 'refers ' and is used loosly.
<?php
$a1 = new A(1); // $a1 == handle1-1 to A(1)
$a2 = $a1; // $a2 == handle1-2 to A(1) - assigned by value (copy)
$a3 = &$a1; // $a3 points to $a1 (handle1-1)
$a3 = null; // makes $a1==null, $a3 (still) points to $a1, $a2 == handle1-2 (same object instance A(1))
$a2 = null; // makes $a2 == null
$a1 = new A(2); //makes $a1 == handle2-1 to new object and $a3 (still) points to $a1 => handle2-1 (new object), so value of $a1 and $a3 is the new object and $a2 == null
//By reference:
$a4 = &new A(4); //$a4 points to handle4-1 to A(4)
$a5 = $a4; // $a5 == handle4-2 to A(4) (copy)
$a6 = &$a4; //$a6 points to (handle4-1), not to $a4 (reference to reference references the referenced object handle4-1 not the reference itself)
$a4 = &new A(40); // $a4 points to handle40-1, $a5 == handle4-2 and $a6 still points to handle4-1 to A(4)
$a6 = null; // sets handle4-1 to null; $a5 == handle4-2 = A(4); $a4 points to handle40-1; $a6 points to null
$a6 =&$a4; // $a6 points to handle40-1
$a7 = &$a6; //$a7 points to handle40-1
$a8 = &$a7; //$a8 points to handle40-1
$a5 = $a7; //$a5 == handle40-2 (copy)
$a6 = null; //makes handle40-1 null, all variables pointing to (hanlde40-1 ==null) are null, except ($a5 == handle40-2 = A(40))
?>
Hope this helps.
Objetos e Referências
Um dos pontos-chave da programação orientada a objetos no PHP5 que é frequentemente mencionado é que "objetos são passados por referências por padrão". Isto não é completamente verdade. Esta seção retifica esse pensamento geral usando alguns exemplos.
Uma referência PHP é um alias, que permite duas variáveis diferentes escreverem para o mesmo valor. A partir do PHP5, uma variável objeto não contém mais o próprio objeto como valor. Ela contém um identificador do objeto que permite que os acessadores do objeto encontrem o objeto real. Quando um objeto é enviado por argumento, retornado ou atribuído para outra variável, as variáveis diferentes não são aliases: elas armazenam uma cópia do identificador, que aponta para o mesmo objeto.
Exemplo #1 Referências e Objetos
<?php
class A {
public $foo = 1;
}
$a = new A;
$b = $a; // $a and $b are copies of the same identifier
// ($a) = ($b) = <id>
$b->foo = 2;
echo $a->foo."\n";
$c = new A;
$d = &$c; // $c and $d are references
// ($c,$d) = <id>
$d->foo = 2;
echo $c->foo."\n";
$e = new A;
function foo($obj) {
// ($obj) = ($e) = <id>
$obj->foo = 2;
}
foo($e);
echo $e->foo."\n";
?>
O exemplo acima irá imprimir:
2 2 2
add a note
User Contributed NotesObjetos e Referências
mjung at poczta dot onet dot pl
16-Aug-2009 05:25
16-Aug-2009 05:25
Aaron Bond
20-Jun-2009 01:08
20-Jun-2009 01:08
I've bumped into a behavior that helped clarify the difference between objects and identifiers for me.
When we hand off an object variable, we get an identifier to that object's value. This means that if I were to mutate the object from a passed variable, ALL variables originating from that instance of the object will change.
HOWEVER, if I set that object variable to new instance, it replaces the identifier itself with a new identifier and leaves the old instance in tact.
Take the following example:
<?php
class A {
public $foo = 1;
}
class B {
public function foo(A $bar)
{
$bar->foo = 42;
}
public function bar(A $bar)
{
$bar = new A;
}
}
$f = new A;
$g = new B;
echo $f->foo . "\n";
$g->foo($f);
echo $f->foo . "\n";
$g->bar($f);
echo $f->foo . "\n";
?>
If object variables were always references, we'd expect the following output:
1
42
1
However, we get:
1
42
42
The reason for this is simple. In the bar function of the B class, we replace the identifier you passed in, which identified the same instance of the A class as your $f variable, with a brand new A class identifier. Creating a new instance of A doesn't mutate $f because $f wasn't passed as a reference.
To get the reference behavior, one would have to enter the following for class B:
<?php
class B {
public function foo(A $bar)
{
$bar->foo = 42;
}
public function bar(A &$bar)
{
$bar = new A;
}
}
?>
The foo function doesn't require a reference, because it is MUTATING an object instance that $bar identifies. But bar will be REPLACING the object instance. If only an identifier is passed, the variable identifier will be overwritten but the object instance will be left in place.
Ivan Bertona
15-Oct-2008 03:45
15-Oct-2008 03:45
A point that in my opinion is not stressed enough in the manual page is that in PHP5, passing an object as an argument of a function call with no use of the & operator means passing BY VALUE an unique identifier for that object (intended as instance of a class), which will be stored in another variable that has function scope.
This behaviour is the same used in Java, where indeed there is no notion of passing arguments by reference. On the other hand, in PHP you can pass a value by reference (in PHP we refer to references as "aliases"), and this poses a threat if you are not aware of what you are really doing. Please consider these two classes:
<?php
class A
{
function __toString() {
return "Class A";
}
}
class B
{
function __toString() {
return "Class B";
}
}
?>
In the first test case we make two objects out of the classes A and B, then swap the variables using a temp one and the normal assignment operator (=).
<?php
$a = new A();
$b = new B();
$temp = $a;
$a = $b;
$b = $temp;
print('$a: ' . $a . "\n");
print('$b: ' . $b . "\n");
?>
As expected the script will output:
$a: Class B
$b: Class A
Now consider the following snippet. It is similar to the former but the assignment $a = &$b makes $a an ALIAS of $b.
<?php
$a = new A();
$b = new B();
$temp = $a;
$a = &$b;
$b = $temp;
print('$a: ' . $a . "\n");
print('$b: ' . $b . "\n");
?>
This script will output:
$a: Class A
$b: Class A
That is, modifying $b reflects the same assignment on $a... The two variables end pointing to the same object, and the other one is lost. To sum up is a good practice NOT using aliasing when handling PHP5 objects, unless your are really really sure of what you are doing.
lazybones_senior
01-Oct-2008 01:57
01-Oct-2008 01:57
WHOA... KEEP IT SIMPLE!
In regards to secure_admin's note: You've used OOP to simplify PHP's ability to create and use object references. Now use PHP's static keyword to simplify your OOP.
<?php
class DataModelControl {
protected static $data = 256; // default value;
protected $name;
public function __construct($dmcName) {
$this->name = $dmcName;
}
public static function setData($dmcData) {
if(is_numeric($dmcData)) {
self::$data = $dmcData;
}
}
public function __toString() {
return "DataModelControl [name=$this->name, data=" . self::$data . "]";
}
}
# create several instances of DataModelControl...
$dmc1 = new DataModelControl('dmc1');
$dmc2 = new DataModelControl('dmc2');
$dmc3 = new DataModelControl('dmc3');
echo $dmc1 . '<br>';
echo $dmc2 . '<br>';
echo $dmc3 . '<br><br>';
# To change data, use any DataModelControl object...
$dmc2->setData(512);
# Or, call setData() directly from the class...
DataModelControl::setData(1024);
echo $dmc1 . '<br>';
echo $dmc2 . '<br>';
echo $dmc3 . '<br><br>';
?>
DataModelControl [name=dmc1, data=256]
DataModelControl [name=dmc2, data=256]
DataModelControl [name=dmc3, data=256]
DataModelControl [name=dmc1, data=1024]
DataModelControl [name=dmc2, data=1024]
DataModelControl [name=dmc3, data=1024]
... even better! Now, PHP creates one copy of $data, that is shared amongst all DataModelControl objects.
secure_admin
30-Sep-2008 11:38
30-Sep-2008 11:38
USE OOP to ACCESS OBJECT REFERENCES
The PHP language itself offers a slew of nifty operators that can copy, clone, and alias objects and references in many ways. But that kind of syntax looks rather fearsome. Here, I use OOP to get the same results, but with cleaner and more practical code. Below, one DataModel object is instantiated so that many instances of DataControl can use and alter it. Regardless of how PHP works, the OOP styled setup keeps all DataControl instances "on the same page" because they are all looking at the "same model" - which this code clearly shows.
<?php
class DataModel {
protected $name, $data;
public function __construct($dmName, $dmData) {
$this->name = $dmName;
$this->setData($dmData);
}
public function setData($dmData) {
if(is_numeric($dmData)) {
$this->data = $dmData;
}
}
public function __toString() {
return "DataModel [name=$this->name, data=$this->data]";
}
}
class DataControl {
protected $name, $model;
public function __construct($dcName, $dcModel) {
$this->name = $dcName;
$this->model = $dcModel;
}
public function setData($dmData) {
$this->model->setData($dmData);
}
public function __toString() {
return "DataController [name=$this->name, model=" . $this->model->__toString() . "]";
}
}
# create one instance of DataModel...
$model = new DataModel('dm1', 128);
echo $model . '<br><br>';
# create several instances of DataControl, passing $model to each one...
$dc1 = new DataControl('dc1', $model);
$dc2 = new DataControl('dc2', $model);
$dc3 = new DataControl('dc3', $model);
echo $dc1 . '<br>';
echo $dc2 . '<br>';
echo $dc3 . '<br><br>';
# To change data, use any $dataControl->setData()...
$dc3->setData(512);
echo $dc1 . '<br>';
echo $dc2 . '<br>';
echo $dc3 . '<br><br>';
?>
* * * output * * *
DataModel [name=dm1, data=128]
DataController [name=dc1, model=DataModel [name=dm1, data=128]]
DataController [name=dc2, model=DataModel [name=dm1, data=128]]
DataController [name=dc3, model=DataModel [name=dm1, data=128]]
DataController [name=dc1, model=DataModel [name=dm1, data=512]]
DataController [name=dc2, model=DataModel [name=dm1, data=512]]
DataController [name=dc3, model=DataModel [name=dm1, data=512]]
wbcarts at juno dot com
30-Sep-2008 08:23
30-Sep-2008 08:23
A BIT DILUTED... but it's alright!
In the PHP example above, the function foo($obj), will actually create a $foo property to "any object" passed to it - which brings some confusion to me:
$obj = new stdClass();
foo($obj); // tags on a $foo property to the object
// why is this method here?
Furthermore, in OOP, it is not a good idea for "global functions" to operate on an object's properties... and it is not a good idea for your class objects to let them. To illustrate the point, the example should be:
<?php
class A {
protected $foo = 1;
public function getFoo() {
return $this->foo;
}
public function setFoo($val) {
if($val > 0 && $val < 10) {
$this->foo = $val;
}
}
public function __toString() {
return "A [foo=$this->foo]";
}
}
$a = new A();
$b = $a; // $a and $b are copies of the same identifier
// ($a) = ($b) = <id>
$b->setFoo(2);
echo $a->getFoo() . '<br>';
$c = new A();
$d = &$c; // $c and $d are references
// ($c,$d) = <id>
$d->setFoo(2);
echo $c . '<br>';
$e = new A();
$e->setFoo(16); // will be ignored
echo $e;
?>
- - -
2
A [foo=2]
A [foo=1]
- - -
Because the global function foo() has been deleted, class A is more defined, robust and will handle all foo operations... and only for objects of type A. I can now take it for granted and see clearly that your are talking about "A" objects and their references. But it still reminds me too much of cloning and object comparisons, which to me borders on machine-like programming and not object-oriented programming, which is a totally different way to think.